What Is Tricone Drill Bit?
Tricone Drill Bitis an ideal solution for soft, medium, or hard
rock formations, it is connected with the drill stem and rotates
along with it, and drive cones to pressed on the rock. Each cone
rotates round the axis of its leg and three cones simultaneously
revolve around the bit center. The tungsten carbide inserts on the
cone shell cause the formation to spall under the weight on bit and
the impact load of cone rotating, the debris will be discharged out
to hole by compression air. Tricone bits come in several different
varieties, and can deal with a wide range of different rock
formations. It is important to know the type of formation you are
drilling in when selecting a drill bit.
Application:
Medium to Medium-Hard Formation
For use in moderately abrasive consolidated formations with
compressive strength ranging between 140 – 485 Mpa such as hard
limestone, quartzite, granodiorite, and medium grade metamorphic
formations
Cutting structure: These bits are characterized by moderately
spaced conical inserts with medium projection. This configuration
promotes good penetration rates in medium hard and moderately
abrasive formations. Smaller carbide inserts are provided on the
gage and inner rows or hard metal is deposited in the nose area to
contain shell erosion and improve performance.
Weight on Bit (WOB):2,500 – 7,000 lbs/in of bit diameter
Compression Strength:20,000 – 70,000 psi
Drilling Speeds:60 – 100 rpm
Jet Circulation:All sizes
Cutting Structure
Ovoid insert on gauge,the bullet shaped on inner rows and Nose Rows
Designed for hard and semi-abrasive formations with high
compressive strengths ,such as hard shale,sandstone,
limestone,dolomite,chert and copper ore.
Application:46,000-56,000Psi(317-386MPa)
Shirttail
Hard metal on lug;Wear resistant carbide on shirttail lip and lug
ProductSpecification
IADC Code: 745 /742
Bearing Type:Roller-Ball-Roller-Thrust Button/Sealed Bearing(Open
Bearing)bearing/Open bearing
Circulation Type:Jet Air
Inner Rows: the bullet shaped
Gauge and Nose Rows: ovoid insert
Gauge bevel protection:Round
Pin Connection:6 5/8″ API
Metric Bit Diameter:279 mm
Product Weight:74 kg
OperatingSuggestions
Weight on Bit: 43,000-66,000 lbs
Rotary Speed: 60-90RPM
Air Back Pressure: 0.2-0.4Mpa
