Product Description
RY Hot Oil Circulation Pump adopts the self-heat-radiating
structure, change the traditional water cooling structure, make it
more simple, small volume, economy operation cost, good
performance, reliable operation.
Structure Characteristics:
1. Basic structure is single stage single suction cantilever feet
support, pump suction is axial inhaled, discharge center vertical,
and installed in a same base with motor.
2. RY Hot Oil Circulation Pump supported by double ball bearing,
front end lubricated by lubricating oil, back end lubricated by
grease, a guide tubing in the middle, to observe the conditions of
sealing at any time and recovery of heat conduction oil.
3. Hot oil pump shaft seal:
(1) With the combination of packing seal and mechanical seal,
packing seal use high temperature resistant packing, has the good
thermal adaptability, while mechanical seal adopts high mechanical
strength and wear resistance, good hard alloy material, which
guarantees the sealing performance under high temperature
conditions.
(2) Adopts imported polyethylene (PTFE) as lip shape seal, make the
sealing performance much better, seal reliability of 25 times than
rubber seal, and with very strong corrosion-resist ability.
Application Scope
1,Petro-chemical Industry
2,Oil Industry
3,Synthetic-fibre Industry
4,Textile Dyeing And Printing Industry
5,Plastic And Rubber Industry
6,Papermaking Industry
7,Timber Processing Industry
8,Construction Industry
Besides the above fields the pumps are also proper in machinery
manufacruring,food processing,Medicine making and the circling
system for oil supplying of the hot oil boiler , the circling
system of the heating installation.
Performance Scope of RY Hot Oil Pump
1,Capacity : 1-500m3/h;
2,Delivery lift : 10-125m;
3,Temperature : -20.C-350.C;
The Ordering Code of RY tye pump
| RY 100-65-200A |
| RY | 100 | 65 | 200 | A |
| Hot Oil Pump | The Inlet Diameter of Pump Case | The Outlet Dimeter of Pump Case | Vane wheel's Nominal Diameter of Pump Case | The First Cutting of Outer Diameter of The Vane wheel (D,E
Represents Shaperforming wheel ) |
Performance Parameters:
| Model | Capacity | Lift | Speed | Power kw | Efficiency | Motor-Y |
| m 3 /h | m | r/min | Shaft | Power | η% |
| power | Distribution |
| RY50-32-160 | 12.5 | 30 | 2900 | 1.9 | 3 | 57 | 100L |
| RY50-32-200 | 18 | 40 | 2900 | 3.92 | 5.5 | 50 | 132Sl |
| RY50-32-200A | 16 | 32 | 2900 | 3.35 | 4 | 42 | 112M |
| RY50-32-250 | 12.5 | 80 | 2900 | 6.2 | 11 | 44 | 160Ml |
| RY65-50-160 | 20 | 32 | 2900 | 3.17 | 5.5 | 55 | 132S1 |
| RY65-40-200 | 30 | 48 | 2900 | 6.3 | 7.5 | 62 | 132S2 |
| RY65-40-200A | 25 | 35 | 2900 | 4 | 5.5 | 59 | 132S1 |
| RY65-40-250 | 25 | 80 | 2900 | 10.3 | 15 | 53 | 160M2 |
| RY65-40-250A | 20 | 51 | 2900 | 5.67 | 7.5 | 49 | 132S2 |
| RY65-40-315 | 25 | 125 | 2900 | 18.9 | 30 | 45 | 200L1 |
| RY65-40-315A | 22.5 | 100 | 2900 | 15.3 | 22 | 40 | 180M |
| RY80-50-200 | 50 | 50 | 2900 | 9.7 | 15 | 70 | 160M2 |
| RY80-50-200A | 45 | 40 | 2900 | 7.8 | 11 | 63 | 160M1 |
| RY80-50-200B | 40 | 32 | 2900 | 6.37 | 7.5 | 55 | 132S2 |
| RY80-50-250 | 50 | 80 | 2900 | 17.1 | 22 | 58 | 180M |
| RY80-50-250A | 43 | 60 | 2900 | 12.8 | 15 | 55 | 160M2 |
| RY80-50-315 | 50 | 125 | 2900 | 30.4 | 45 | 56 | 225M |
| RY80-50-315A | 45 | 100 | 2900 | 23.6 | 30 | 52 | 200L1 |
| RY100-65-200 | 100 | 50 | 2900 | 18.4 | 22 | 74 | 180M |
| RY100-65-200A | 94 | 44 | 2900 | 16 | 22 | 70 | 180M |
| RY100-65-200B | 87 | 38 | 2900 | 13.8 | 15 | 65 | 160M2 |
| RY100-65-200C | 80 | 32 | 2900 | 11.8 | 15 | 59 | 160M2 |
| RY100-65-250 | 100 | 80 | 2900 | 32.06 | 37 | 68 | 200L2 |
| RY100-65-250A | 95 | 72 | 2900 | 29 | 37 | 64 | 200L2 |
| RY100-65-250B | 90 | 65 | 2900 | 26.2 | 30 | 61 | 200L1 |
| RY100-65-250C | 85 | 50 | 2900 | 20.3 | 30 | 57 | 200L1 |
| RY100-65-315 | 100 | 125 | 2900 | 50.06 | 75 | 68 | 280S |
| RY100-65-315A | 95 | 113 | 2900 | 45.23 | 55 | 64.63 | 250M |
| RY100-65-315B | 90 | 100 | 2900 | 40.5 | 55 | 60.5 | 250M |
| RY100-65-315C | 82 | 84 | 2900 | 34.76 | 45 | 54 | 225M |
| RY125-100-200 | 200 | 50 | 2900 | 35.4 | 45 | 77 | 225M |
| RY125-100-200A | 178 | 40 | 2900 | 26.6 | 37 | 73 | 200L2 |
| RY125-100-250 | 200 | 70 | 2900 | 47 | 55 | 80 | 250M |
| RY125-100-250A | 190 | 63 | 2900 | 41.6 | 55 | 78 | 250M |
| RY125-100-250B | 180 | 57 | 2900 | 37.9 | 45 | 74 | 225M |
| RY125-100-250C | 170 | 51 | 2900 | 32.15 | 45 | 72 | 225M |
| RY125-100-250D | 150 | 70 | 2900 | 40 | 45 | 70 | 225M |
| RY150-150-200 | 350 | 50 | 2900 | 60 | 75 | 80 | 280S |
| RY150-150-200A | 313 | 40 | 2900 | 45 | 55 | 76 | 250M |
| RY200-150-400 | 350 | 50 | 1450 | 61.8 | 75 | 78 | 280S |
| RY200-150-400A | 330 | 45 | 1450 | 52.8 | 75 | 77 | 280S |
| RY250-200-400 | 500 | 50 | 1480 | 86.2 | 110 | 79 | 315S |
| RY250-200-500 | 500 | 80 | 1480 | 136 | 160 | 76.5 | 315M |
| RY250-200-500A | 400 | 50 | 1480 | 75 | 90 | 73 | 280M |
